ICM-20789 TDKInvenSenseICM207897軸壓力傳感器

數據： TDKInvenSenseICM207897軸壓力傳感器.pdf

TDK InvenSense ICM-20789 7軸慣性和大氣壓力傳感器在單個小尺寸外形中設有各種高性能的分立元件，用于跟蹤旋轉和線性運動以及壓差。ICM-20789是一款集成式6軸慣性器件，在24引腳LGA封裝中結合了3軸陀螺儀、3軸加速度計，以及超低噪聲MEMS電容式壓力傳感器。

The pressure sensor features MEMS capacitive architecture to provide low noise at low power, high sensor throughput, and temperature coefficient offset of ±0.5 Pa/°C. A combination of high accuracy elevation measurements, low power, and temperature stability complemented by the motion tracking 6-axis inertial sensor in a small footprint, is ideal for a wide range of motion tracking applications.

The embedded 6-axis MotionTracking device combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP). A large 4 kB FIFO reduces traffic on the serial bus interface, and power consumption through burst sensor data transmission. The Gyroscope has programmable FSR of ±250 dps, ±500 dps, ±1000 dps and ±2000 dps. The Accelerometer FSR is programmable to ±2g, ±4g, ±8g and ±16g.

The ICM-20789 incorporates a 6-axis inertial sensor and 24-bit ADC for the pressure sensor, programmable digital filters, two temperature sensors – one each in the 6-axis inertial and pressure sensor. Features include an operating voltage of 1.8V and the communication port includes I2C at 400kHz (6-axis and pressure) and 8MHz SPI (6-axis only). A 4mm x 4mm x 1.365mm 24-pin package minimizes board area requirements.

特性

陀螺儀的特點
- Digital-output X-, Y-, and Z-axis angular rate sensors (gyroscopes) with a user-programmable full-scale range of ±250 dps, ±500 dps, ±1000 dps, and ±2000 dps and integrated 16-bit ADCs
- 數字可編程低通濾波器
- 低功率陀螺儀操作
- 工廠校準的靈敏度標度因子
- [醫]自行試驗
加速度計的特點
- Digital-output X-, Y-, and Z-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g, and ±16g and integrated 16-bit ADCs
- 用戶可編程中斷
- 用于應用程序處理器低功耗操作的運動喚醒中斷
- [醫]自行試驗
壓力傳感器功能
- 壓力操作范圍：30kPa～110kPa
- 4 operating modes to optimize noise and power, 3 example modes:x3.2Pa @ 1.3μA (LP mode)
- x0.8Pa @ 5.2μA (LN mode)
- x0.4Pa @ 10.4μA (ULN mode)
- Relative accuracy: ±1 Pa for any 10 hPa change over 950 hPa-1050 hPa at 25°C
- Absolute accuracy: ±1 hPa over 950 hPa-1050 hPa, 0°C to 65°C
- Temperature Coefficient Offset: ±0.5 Pa/°C over 25°C to 45°C at 100 kPa
- 在400千赫茲的I2C
- Temperature sensor accuracy: ±0.4°C
附加特性（additional feature的復數）
- 加速度計和陀螺儀軸之間的最小交叉軸靈敏度
- 4kB FIFO緩沖區使應用程序處理器能夠以突發方式讀取數據
- 數字輸出溫度傳感器
- 用于陀螺儀、加速度計和溫度傳感器的用戶可編程數字濾波器
- 10000g沖擊容限
- 400千赫茲快速模式I2C，用于與所有寄存器通信
- 符合RoHS和綠色要求
運動處理
- Internal Digital 運動處理™ (DMP™) engine supports advanced MotionProcessing and low power functions
- 在低功率陀螺儀和低功率加速度計模式下，DMP操作是可能的