NRB8-18GM50-E2-C-V1-EXG 傳感器現貨直發

型號： NRB8-18GM50-E2-C-V1-EXG

參數表節選：的技術參數 NRB8-18GM50-E2-C-V1-EXG

General specifications
Switching function		Normally open (NO)
Output type		PNP
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 6.48 mm Only for use in mounting aid EXG-18
Reduction factor rAl		1
Reduction factor rCu		1
Reduction factor r304		1
Reduction factor rSt37		1
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		0 ... 600 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA typ. 0.1 μA at 25 °C
No-load supply current		≤ 15 mA
Constant magnetic field		200 mT
Alternating magnetic field		200 mT
Switching state indicator		Multihole-LED, yellow
Functional safety related parameters
MTTFd		1360 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
Protection class		II
	Rated insulation voltage	60 V
	Rated impulse withstand voltage	800 V
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector M12 x 1 , 4-pin
Housing material		Brass, PTFE coated
Sensing face		Ryton R4
Housing diameter		18 mm
Degree of protection		IP67
Note		Only for use in mounting aid EXG-18