--- 產品詳情 ---
Number of channels (#) | 1 |
Vs (Max) (V) | 36 |
Vs (Min) (V) | 4.5 |
Input offset (+/-) (Max) (uV) | 500 |
Gain (Min) (V/V) | 1 |
Gain (Max) (V/V) | 10000 |
Noise at 1 kHz (Typ) (nV/rt (Hz)) | 20 |
Features | Overvoltage Protection |
CMRR (Min) (dB) | 106 |
Input offset drift (+/-) (Max) (uV/C) | 5 |
Input bias current (+/-) (Max) (nA) | 0.05 |
Iq (Typ) (mA) | 0.45 |
Bandwidth at min gain (Typ) (MHz) | 0.6 |
Gain error (+/-) (Max) (%) | 0.5 |
Operating temperature range (C) | -40 to 85 |
Type | Resistor |
Output swing headroom (to negative supply) (Typ) (V) | 0.15 |
Output swing headroom (to positive supply) (Typ) (V) | -0.9 |
Input common mode headroom (to negative supply) (Typ) (V) | 2 |
Input common mode headroom (to positive supply) (Typ) (V) | -2 |
Noise at 0.1 Hz-10 Hz (Typ) (uVpp) | 1 |
Gain non-linearity (+/-) (Max) (%) | 0.005 |
- LOW BIAS CURRENT: ±4pA
- LOW QUIESCENT CURRENT: ±450μA
- LOW INPUT OFFSET VOLTAGE: ±200μV
- LOW INPUT OFFSET DRIFT: ±2μV/°C
- LOW INPUT NOISE: 20nV/sqrt(Hz) at f = 1kHz (G =100)
- HIGH CMR: 106dB
- WIDE SUPPLY RANGE: ±2.25V to ±18V
- LOW NONLINEARITY ERROR: 0.001% max
- INPUT PROTECTION TO ±40V
- 8-PIN DIP AND SO-8 SURFACE MOUNT
The INA121 is a FET-input, low power instrumentation amplifier offering excellent accuracy. Its versatile three-op amp design and very small size make it ideal for a variety of general purpose applications. Low bias current (±4pA) allows use with high impedance sources.
Gain can be set from 1V to 10,000V/V with a single external resistor. Internal input protection can withstand up to ±40V without damage.
The INA121 is laser-trimmed for very low offset voltage (±200μV), low offset drift (±2μV/°C), and high common-mode rejection (106dB at G = 100). It operates on power supplies as low as ±2.25V (+4.5V), allowing use in battery operated and single 5V systems. Quiescent current is only 450μA.
Package options include 8-pin plastic DIP and SO-8 surface mount. All are specified for the -40°C to +85°C industrial temperature range.
為你推薦
-
TI數字多路復用器和編碼器SN54HC1512022-12-23 15:12
-
TI數字多路復用器和編碼器SN54LS1532022-12-23 15:12
-
TI數字多路復用器和編碼器CD54HC1472022-12-23 15:12
-
TI數字多路復用器和編碼器CY74FCT2257T2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS258A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74AHCT1582022-12-23 15:12
-
【PCB設計必備】31條布線技巧2023-08-03 08:09
相信大家在做PCB設計時,都會發現布線這個環節必不可少,而且布線的合理性,也決定了PCB的美觀度和其生產成本的高低,同時還能體現出電路性能和散熱性能的好壞,以及是否可以讓器件的性能達到最優等。在上篇內容中,小編主要分享了PCB線寬線距的一些設計規則,那么本篇內容,將針對PCB的布線方式,做個全面的總結給到大家,希望能夠?qū)︷B(yǎng)成良好的設計習慣有所幫助。1走線長度1693瀏覽量 -
電動汽車直流快充方案設計【含參考設計】2023-08-03 08:08
-
Buck電路的原理及器件選型指南2023-07-31 22:28
-
100W USB PD 3.0電源2023-07-31 22:27
-
千萬不要忽略PCB設計中線寬線距的重要性2023-07-31 22:27
想要做好PCB設計,除了整體的布線布局外,線寬線距的規則也非常重要,因為線寬線距決定著電路板的性能和穩定性。所以本篇以RK3588為例,詳細為大家介紹一下PCB線寬線距的通用設計規則。要注意的是,布線之前須把軟件默認設置選項設置好,并打開DRC檢測開關。布線建議打開5mil格點,等長時可根據情況設置1mil格點。PCB布線線寬01布線首先應滿足工廠加工能力,1795瀏覽量 -
基于STM32的300W無刷直流電機驅動方案2023-07-06 10:02
-
上新啦!開發板僅需9.9元!2023-06-21 17:43
-
參考設計 | 2KW AC/DC數字電源方案2023-06-21 17:43
-
千萬不能小瞧的PCB半孔板2023-06-21 17:34