So far, we have published three tutorials on using our new NanoBeacon? BLE Scanner mobile app. We covered the following topics:

到目前為止，我們已經發布了三個關于使用我們新的NanoBeacon? BLE掃描器移動應用程序的教程。我們涵蓋了以下主題：

Introduction to the NanoBeacon? BLE Scanner mobile app

NanoBeacon? BLE掃描器移動應用程序介紹

Installation and setup

安裝和設置

Overview of the different features of the app

該應用程序的不同功能概述

How to use the mobile app to discover your IN100 tags

如何使用移動應用程序來發現您的IN100標簽

Overview of device filters

設備過濾器的概述

The differences between the iOS app and the Android app

iOS應用程序和Android應用程序之間的差異

App notifications for detecting triggered advertising sets

檢測觸發的廣播集的應用程序通知

In this tutorial, we will cover the “Logs” and “Monitor” features of the mobile app (available in the latest version of the app)

在本教程中，我們將介紹移動應用程序的 "日志 "和 "監控 "功能（在應用程序的最新版本中可用）。

Let’s get started!

讓我們開始吧!

Logging Feature 記錄功能

First, make sure you have the latest version of the app (whether that’s for iOS or Android).

首先，確保你有最新版本的應用程序（無論是iOS還是Android）。

Once you have the latest version installed, go ahead and launch the app.

一旦你安裝了最新版本，就去啟動該應用程序。

For a simple test case, we’ll be configuring the IN100 with the following parameters:

對于一個簡單的測試案例，我們將用以下參數配置IN100：

One advertising set

一個廣播集

Advertising Data

廣播數據

Advertising data format: Custom

廣播數據格式：自定義

Device Name: “IN100”

設備名稱："IN100"

Manufacturer Specific Data: VCC, Internal Temp

制造商特定數據：VCC，內部溫度

Advertising Parameters

廣播參數

Advertising Interval: 100 ms

廣播間隔：100毫秒

Once you have the parameters set as above, make sure you probe and connect to the device, then click “Run in RAM.”

一旦你設置了上述參數，確保你探測并連接到設備，然后點擊 "在RAM中運行"。

Finally, import your IN100 configuration from NanoBeacon? Config Tool (via the QR code) into the mobile app.

最后，將你的IN100配置從NanoBeacon?配置工具（通過QR碼）導入移動應用程序。

Now that we have the configuration imported into the mobile app, we should see the following in the “Configuration” view:

現在我們已經將配置導入移動應用程序，我們應該在 "配置 "視圖中看到以下內容：

Verify that the configuration is correct, and then navigate to the “Scanner” view.

驗證配置是否正確，然后導航到 "掃描器 "視圖。

Once in the Scanner view, enable the filter “Only show project configuration matches”:

一旦進入 "掃描器 "視圖，啟用過濾器 "只顯示項目配置匹配"：

Now, exit the filter view and refresh the scan. You should see the following on screen:

現在，退出過濾器視圖并刷新掃描。你應該在屏幕上看到以下內容：

Now, click on the “View Data” text to see the detailed real-time advertising data:

現在，點擊 "查看數據 "文本，查看詳細的實時廣播數據：

From here, notice the “Logs” button in the top right corner of the screen. Click on it, and now you should see a real-time log of the captured data. Basically, this shows the history of all the advertising data captured by the app. Once in this view, you’ll also notice that there’s an export button in the top right-hand corner of the screen:

在這里，注意屏幕右上角的 "日志 "按鈕。點擊它，現在你應該看到捕獲數據的實時日志?；旧?，這顯示了該應用程序捕獲的所有廣播數據的歷史。一旦進入這個視圖，你還會注意到，在屏幕的右上角有一個導出按鈕：

This allows you to export the full log via email, clipboard, and other methods supported by your device:

這允許你通過電子郵件、剪貼板和你的設備支持的其他方法導出完整的日志：

The exported format is in CSV (comma-separated values), so you can easily import it into Excel or any other spreadsheet app you choose.

導出的格式是CSV（omma-separated values），所以你可以很容易地把它導入Excel或你選擇的任何其他電子表格應用程序。

You’ll also notice two other icons in the bottom right-hand corner of the screen, the trash icon（