低噪聲放大器最大限度地提高接收機靈敏度

　　在每個射頻接收系統，如那些在基站，發現手機、GPS、無線局域網接口，和其他應用中，低噪聲放大器（LNA）可用于具有較高的內部噪聲水平更換放大器提高信噪比。這些系統中的噪聲信號來自外部源（外部）和內部電路組件源（內在），表現出設計者可以計算和補償?shù)奶匦浴Ｍ獠吭肼曉纯梢员贿^(guò)濾，以提供更清潔的信號給放大器，通過精心設計和選擇放大器，信號噪聲比（SNR）可以最大化。

　　噪聲系數（NF）是描述信號鏈中放大器提供的附加噪聲量的設計參數。噪聲會降低模擬信號或數字通信系統的比特和幀錯誤率。在雷達系統中，接收機噪聲會限制雷達的有效范圍。理想情況下，設計者應該優化總體信噪比，以提供最佳的系統性能。噪聲系數定義為噪聲因子F，表示分貝［ NF = 10×日志（F）］，與F定義為（Si／Ni）/（/無），比信噪比在輸入信噪比在輸出。

　　All amplifiers have some amount of thermal noise and other types of noise that they add to the signal they are trying to amplify. And since most RF signals are relatively weak when they reach the receiving antenna， the amplification process should introduce as little noise as possible to deliver the cleanest signal to the rest of the system. In many applications， multiple gain stages are cascaded to greatly improve the signal strength. The Friss equation shows that the noise figure， F1， of the first receiver stage dominates the added noise， and subsequent stages have progressively lower impact on the total noise.