The 33912G5/BAC is a Serial Peripheral Interface （SPI） controlled System Basis Chip （SBC）， combining many frequently used functions in an MCU based system， plus a Local Interconnect Network （LIN） transceiver. The 33912 has a 5.0 V， 50 mA/60 mA low dropout regulator with full protection and reporting features. The device provides full SPI readable diagnostics and a selectable timing watchdog for detecting errant operation. The LIN Protocol Specification 2.0 and 2.1 compliant LIN transceiver has waveshaping circuitry which can be disabled for higher data rates. Two 50 mA/60 mA high-side switches and two 150 mA/160 mA low-side switches with output protection are available. All outputs can be pulse-width modulated （PWM）。 Four high voltage inputs are available for use in contact monitoring， or as external wake-up inputs. These inputs can be used as high voltage Analog Inputs. The voltage on these pins is divided by a selectable ratio and available via an analog multiplexer. The 33912 has three main operating modes： Normal （all functions available）， Sleep （VDD off， wake-up via LIN， wake-up inputs （L1-L4）， cyclic sense and forced wake-up）， and Stop （VDD on with limited current capability， wake-up via CS， LIN bus， wake-up inputs， cyclic sense， forced wake-up and external reset）。 The 33912 is compatible with LIN Protocol Specification 2.0， 2.1， and SAEJ2602- 2. This device is powered using SMARTMOS technology.