摘要：基于SPI總線，設計實現控制器對EEPROM完成讀寫操作，詳細說明了SPI總線的原

理以及控制器的寄存器定義，并且結合應用實例描述了EEPROM讀寫操作的流程和時序。通

過編寫ARM處理器的驅動程序，對控制器進行操作，實現了對EEPROM的讀與寫的具體過程，同時驗證了SP1總線接口設計的正確性。

關鍵詞：SPI總線；EEPROM；ARM處理器；控制寄存器；驅動

mplementation of EEPROM controller based on SPI Jia Xuar School of Information and Communication Engineering，Beijing University of Posts ano Telecommunications，Beijing 100876）

Abstract：Based on SPI bus，design controller to read and write the EEPROM.Detailedly describe the SPI bus working principle and register defination of controller.On the basis of application example，EEPROM read and write operation and timing are introduced.Through the compilatior of controller driver based on ARM processor，achieve read and write operation to the EEPROM.

and verify the correctness of the SPI bus interface design.

Keywords：SPI bus：EEPROM：ARM processor：controller register；driver