chinese直男口爆体育生外卖, 99久久er热在这里只有精品99, 又色又爽又黄18禁美女裸身无遮挡, gogogo高清免费观看日本电视,私密按摩师高清版在线,人妻视频毛茸茸,91论坛 兴趣闲谈,欧美 亚洲 精品 8区,国产精品久久久久精品免费

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
創作
電子發燒友網>電子資料下載>類型>參考設計>Quad-MxFE校準板用戶指南

Quad-MxFE校準板用戶指南

2021-03-22 | pdf | 7.51MB | 次下載 | 免費

資料介紹

This version (04 Feb 2021 21:28) was approved by Mike Jones.The Previously approved version (04 Feb 2021 21:24) is available.Diff

Calibration Board

Splitter/Combiner, Calibration, Power Analyzer

Features

  • Mates to Quad-MxFE Digitizing Card & VCU118 PMOD Interface (Cable Included)
  • MATLAB Control Enables System-Level Calibration Algorithm Development
  • Provides Both Individual Adjacent Channel Loopback and Combined Channel Loopback Options
  • Combined Tx Channels Out Via SMA Option
  • Combined Rx Channels In Via SMA Option
  • On-Board Log Power Detectors With AD5592R Output To VCU118 Over PMOD
  • On-Board Power Regulation from Single 12V Power Adapter (Included)

Below is the full integrated system including the Xilinx VCU118, ADQUADMXFE1EBZ, and ADQUADMXFE-CAL in full operation. For LED identification please see Calibration Broad LED Information, or Quad MxFE LED Information


General Description

This page serves to inform system engineers and software developers about the calibration board addition kit that pairs with the Quad-MxFE. This board directly aligns with the 16 Rx and 16 Tx ports on the output of the Quad MxFE and includes power detectors and loopback configurations for the system-level calibration of the Quad MxFE. The board contains a PMOD 2A interface that connects the VCU118 Evaluation Board from Xilinx?. A DIP switch and multi-channel ADC/DAC,AD5592R, are also included for additional control and power readings. The goal of this kit is to enable users to demonstrate combined-channel dynamic range, spurious, and phase noise improvements, develop system-level calibration algorithms, and demonstrate immediate phase determinism.

High Level Block Diagram

Key Component Location

LED Identification

LED Status Indicators
LED Ref Des Function
DS601 1.9V @ 1.2mA Good From ADM7150 (LDO)
DS602 1.9V @ 1.2mA Good From ADM7150 (LDO)
DS603 3.3V_FPGA Good From VCU118 PMOD 2A

Equipment Needed


Control Interfaces

The calibration board can be controlled in multiple ways including a DIP Switch and 2A PMOD Interface. The board can be controlled with 4 main signals: 5045 V1 and 5045 V2 which control an ADRF5045 which switches the transmit path between combined loopback, low frequency path, high frequency path, and power detection path, CTLR IND which turns off and on adjacent individual loopback for each Rx and Tx channel, and CTRL RX COMB which turns off and on the combined receive loopback path. The DIP Switch controls 4 signals: 5045 V1, 5045 V2, CTRL IND, and CTRL RX COMB. The PMOD Interface has 8 signals: 5045 V1, 5045 V2, CTRL IND, CTRL RX COMB, and 4 SPI Communications signals. The AD5592R is an 8 channel GPIO/ADC/DAC and it is connected the same control signals as the DIP switch as well as the three power detectors (AD8318, HMC948, LTC5596), plus a temperature sensor on the AD8318. Below is a tabular representation of these control signals.

Software Needed

The following link contains the MATLAB driver for controlling the 16 Tx / 16 Rx Calibration board via the VCU118 PMOD interface. The driver may be used to configure the Quad MxFE platform in a Combined Loopback, Individual Loopback, Combined Tx to SMA, Combined Rx from SMA, Combined Tx Power reading, and Power readings from the AD5592R and subsequent (AD8318, HMC948, LTC5596).

  • AD5592R 8 Channel, 12-Bit, Configurable ADC/DAC with on-chip Reference, SPI interface
  • HMC948 54 dB Logarithmic Detector SMT, 1 - 23 GHz
  • LTM5596 100MHz to 40GHz Linear-in-dB RMS Power Detector with 35dB Dynamic Range
  • AD8318 1 MHz TO 8 GHz, 70 dB Logarithmic Detector/Controller
  • ADP5020 Power Management Unit for Imaging Modules
  • AD5045 Fully Accurate 14-Bit VOUT nanoDAC? SPI Interface 4.5 V to 5.5 V in a TSSOP

Schematic

下載該資料的人也在下載 下載該資料的人還在閱讀
更多 >

評論

查看更多

下載排行

本周

  1. 1AN-1267: 使用ADSP-CM408F ADC控制器的電機控制反饋采樣時序
  2. 1.41MB   |  3次下載  |  免費
  3. 2AN158 GD32VW553 Wi-Fi開發指南
  4. 1.51MB   |  2次下載  |  免費
  5. 3AN148 GD32VW553射頻硬件開發指南
  6. 2.07MB   |  1次下載  |  免費
  7. 4AN-1154: 采用恒定負滲漏電流優化ADF4157和ADF4158 PLL的相位噪聲和雜散性能
  8. 199.28KB   |  次下載  |  免費
  9. 5AN-960: RS-485/RS-422電路實施指南
  10. 380.8KB   |  次下載  |  免費
  11. 6EE-249:使用VisualDSP在ADSP-218x DSP上實現軟件疊加
  12. 60.02KB   |  次下載  |  免費
  13. 7AN-1111: 使用ADuCM360/ADuCM361時的降低功耗選項
  14. 306.09KB   |  次下載  |  免費
  15. 8AN-904: ADuC7028評估板參考指南
  16. 815.82KB   |  次下載  |  免費

本月

  1. 1ADI高性能電源管理解決方案
  2. 2.43 MB   |  450次下載  |  免費
  3. 2免費開源CC3D飛控資料(電路圖&PCB源文件、BOM、
  4. 5.67 MB   |  138次下載  |  1 積分
  5. 3基于STM32單片機智能手環心率計步器體溫顯示設計
  6. 0.10 MB   |  130次下載  |  免費
  7. 4使用單片機實現七人表決器的程序和仿真資料免費下載
  8. 2.96 MB   |  44次下載  |  免費
  9. 5美的電磁爐維修手冊大全
  10. 1.56 MB   |  24次下載  |  5 積分
  11. 6如何正確測試電源的紋波
  12. 0.36 MB   |  18次下載  |  免費
  13. 7感應筆電路圖
  14. 0.06 MB   |  10次下載  |  免費
  15. 8萬用表UT58A原理圖
  16. 0.09 MB   |  9次下載  |  5 積分

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935121次下載  |  10 積分
  3. 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
  4. 1.48MB  |  420062次下載  |  10 積分
  5. 3Altium DXP2002下載入口
  6. 未知  |  233088次下載  |  10 積分
  7. 4電路仿真軟件multisim 10.0免費下載
  8. 340992  |  191367次下載  |  10 積分
  9. 5十天學會AVR單片機與C語言視頻教程 下載
  10. 158M  |  183335次下載  |  10 積分
  11. 6labview8.5下載
  12. 未知  |  81581次下載  |  10 積分
  13. 7Keil工具M(jìn)DK-Arm免費下載
  14. 0.02 MB  |  73810次下載  |  10 積分
  15. 8LabVIEW 8.6下載
  16. 未知  |  65988次下載  |  10 積分