The EL5283 comparator is designed
for operation in single supply and dual
supply applications with 5V to 12V
between VS+ and VS-. For single supplies, the inputs can
operate from 0.1V below ground for use in ground-sensing
applications.
The output side of the comparators can be supplied from a
single supply of 2.7V to 5V. The rail-to-rail output swing
enables direct connection of the comparator to both CMOS
and TTL logic circuits.
The latch input of the EL5283 can be used to hold the
comparator output value by applying a low logic level to the
pin.
The EL5283 is a window comparator. A single input is
compared with a high reference and a low. When the output
goes beyond one of these reference signals, the relevant
output goes low.
The EL5283 is available in the 10-pin MSOP package and is
specified for operation over the full -40°C to +85°C
temperature range. Also available are a single (EL5181) and
quad versions (EL5481 and EL5482).