//------------------------------------------------------------------------------------
//此程序為ADC轉換程序，可以選擇向ADC0BUSY寫1或用定時器0,1,2,3作為ADC的啟動信號。
//
//------------------------------------------------------------------------------------
//頭文件定義
//------------------------------------------------------------------------------------
//
#include ??????????????
#include

//-----------------------------------------------------------------------------
// 定義16位特殊功能寄存器
//-----------------------------------------------------------------------------

sfr16 ADC0???? = 0xbd;???????????????
sfr16 TMR0RL?? = 0xca;??????????????????????????????????????????????????????????????????????????????????????????????
sfr16 TMR1RL?? = 0xca;????????????????
sfr16 TMR2RL?? =0xca;????????????????
sfr16 TMR3RL?? =0xca;??????????????
sfr16 TMR0???? = 0xCC;?????????????
sfr16 TMR1???? = 0xCC;???????????????
sfr16 TMR2???? = 0xcc;??????????????
sfr16 TMR3???? = 0xcc;??????????????
//-----------------------------------------------------------------------------
// 全局變量定義
//-----------------------------------------------------------------------------
char i;
int result;??????????????????????
//-----------------------------------------------------------------------------
//定義常量
//-----------------------------------------------------------------------------
#define SYSCLK?????? 49000000???????
#define SAMPLE_RATE? 50000????????????
//------------------------------------------------------------------------------------
// 定義函數
//------------------------------------------------------------------------------------
void SYSCLK_Init (void);
void PORT_Init (void);
void Timer0_Init (int counts);
void Timer1_Init (int counts);
void Timer2_Init (int counts);
void Timer3_Init (int counts);
void ADC0_Init(void);
void ADC0_ISR (void);
void ADC0_CNVS_ADC0h(void);
//------------------------------------------------------------------------------------
// 主程序
//------------------------------------------------------------------------------------

void main (void)
{??
??? int ADCRESULT[50] ;
? int k;????????????????
??? PCA0MD &= ~0x40;?????????????????????? // 禁止看門狗?????????????
?
?? SYSCLK_Init ();??????????????????
?
?? PORT_Init ();
?
?? Timer0_Init (SYSCLK/SAMPLE_RATE);?
?? //Timer1_Init (SYSCLK/SAMPLE_RATE);???? //選擇相應的啟動方式
?? //Timer2_Init (SYSCLK/SAMPLE_RATE);
?? //Timer3_Init (SYSCLK/SAMPLE_RATE);??????
?? ADC0_Init();
?? EA=1;
?? while(1)
??????????? {
?? ?
?//ADC0_CNVS_ADC0h();?
?k=ADC0;

?? ADCRESULT[i]=result;?????????????????? //此處設斷點，觀察ADCRESULT的結果
????????? }
?? }