在瑞薩RL78/G13系列演示套件審查的手

　　線之間的演示套件和開發系統變得很難界定，前者包括快速、低功耗單片機用大量?jī)?nèi)存；足夠的外設處理幾乎任何類型的應用程序；1-1／4英寸的液晶屏幕；一套完整的開發工具；內置的調試器；十幾個例子程序，以建立自己的框架；一個代碼生成工具；最后的電路圖和格伯文件。如果有什么東西不見了，那就不明顯了。

　　The Renesas Demonstration Kit （RDK） for the RL78/G13 MCU （see Figure 1） provides a multifunction platform for evaluating the ultra-low-power Renesas RL78/G13 MCU. Numerous peripherals include a speaker， microphone， infrared emitter， infrared detector， LCD screen， 3-axis accelerometer， temperature sensor， and ambient light sensor， all of which can be exercised by the sample code included with the kit. The RDK includes IAR KickStart tools and an integrated Renesas TK debugger.

　　The RDK is built around the Renesas 16-bit， 32 MHz RL78/G13 – a general purpose， ultra-low-power CISC MCU intended for a wide range of consumer and industrial applications. The G13 is currently available in fourteen different packages ranging from the R5F101FAAFP#V0 with 16 KB of flash memory to the R5F100MLAFB#V0 with 512 KB of flash and 32 KB of RAM. The RL78 includes an on-chip 32 MHz oscillator， but the chip can quickly switch to the 32 kHz subsystem clock for ultra-low-speed operation. Also included on-chip is single power supply flash memory， a debug function， multiplier and divider/accumulator， interrupt function， four timers， an 8/10-bit ADC， 16 to 120 I/O ports， and considerably more. Renesas was good enough to put one of the larger chips in the RDK.