本文對國際標準規約IEC60870-5-101 規約在配電自動化應用中的問題進行了探討。
結合實際工程，采用Visual C＃作為開發工具，利用多線程串行通信技術，開發并實現了配電自動化通信系統，保證了FTU 采集的數據的快速上傳。通過測試，系統滿足開發要求，目前該系統已成功運行。
關鍵詞：配電自動化通信規約 開發
Abstract: Some special problems of applying the standard protocol IEC60870-5-101 to
distribution automation system are discussed in this paper. On the basis of engineering
practice, the communication system for distribution automation is developed and
implemented by taking Visual C# as developing tool and making use of Multi-threading
serial communication technique, and the data collected by FTU is also guaranteed to
transmit. According to the test of this system, the requirement of development is satisfied,
now this system is run successfully.
Keywords: distribution automation; communication protocol; development