開發工具和工具包簡化RF設計

　　雖然專有通信硬件和協議可以為自定義或安全應用程序定義，但大多數設計工程師都使用硬件塊來實現標準或協議。沒有什么比通信鏈接更真實的了。

　　在早期，鏈接如RS-485、RS-232、和iee-488易于理解和代碼。簡化的OSI模型意味著設計可以由一個工程師從地面上鍛造出來?？纯?a target='_blank' class='arckwlink_none'>USB、TCP/IP、以太網和以太網供電（POE）所帶來的復雜性，您可以看到，一度簡單的解決方案現在是團隊的努力。

　　為了滿足當前的時間到市場的限制，設計工程師需要更高層次的構建塊和全面的開發工具。所選擇的固件和硬件需要進行集成、測試、監視、特性、認證和批準。硬件和軟件工程師需要協同工作，而開發工具常常是它們在一起的地方。

　　Black boxes

　　In the digital domain， the engineer usually can turn to his or her intuition or “hands on feel” to grasp how any part in a given design operates. We may not be able to design a better multiplier than the one in the processor we specify， but at least we understand what the multiplier is doing， how it works， and how to use it.

　　With analog， this becomes more abstract. While we may be knowledgeable about the function and use of an op amp， in all probability a relatively small percentage of us can say that they understand the intricacies and nuances of the well-designed op amp.