資料介紹
As the modular DC-DC converter industry realizes greater power densities, proper thermal management must be achieved in order to get the most usable power to the load.
Efficiency, while an important element in thermal management, is not the only item to consider. Dealing with
the heat generated by the conversion process should not
be underestimated nor overlooked when designing or
selecting a power supply.
All power product manufacturers specify the maximum
operating temperature of their products. Product reliability
and operating life are inversely proportional to operating
temperature. Assuring a robust design requires that the
temperature limit not be exceeded under any operating
conditions and that sufficient margin be built in. This requires
careful analysis, understanding of the application and
verification through experimentation that the chosen
thermal management approach can deal effectively with
the environmental and load induced demands.
The first step in this process is to determine the worst-case
power dissipation that the system is likely to develop. Use the
following equations to determine the efficiency of the converter over the desired operating range and the maximum loading the device will deliver. Conversion efficiency is defined as:
Efficiency, while an important element in thermal management, is not the only item to consider. Dealing with
the heat generated by the conversion process should not
be underestimated nor overlooked when designing or
selecting a power supply.
All power product manufacturers specify the maximum
operating temperature of their products. Product reliability
and operating life are inversely proportional to operating
temperature. Assuring a robust design requires that the
temperature limit not be exceeded under any operating
conditions and that sufficient margin be built in. This requires
careful analysis, understanding of the application and
verification through experimentation that the chosen
thermal management approach can deal effectively with
the environmental and load induced demands.
The first step in this process is to determine the worst-case
power dissipation that the system is likely to develop. Use the
following equations to determine the efficiency of the converter over the desired operating range and the maximum loading the device will deliver. Conversion efficiency is defined as:
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 應用說明:AS726x_AN000490_1-00.pdf
- 應用說明:AS726xN_AN000558_1-00.pdf
- 8-Lead LLP Thermal Performance a 1次下載
- 無線電接收機Design Considerations for Direct 6次下載
- 多遠程二極管溫度傳感器 (Design Considerat
- LDO Thermal Calculations
- Thermal Management Handbook
- Security Considerations for Vo
- LDO Thermal Calculations
- Thermal Considerations for Pow
- THERMAL DESIGN OF POWER MOSFET
- Thermal Considerations
- Thermal Characterization of Pa
- HFAN-08.1: Thermal Considerati
- Thermal considerations for adv
- MEMS工藝中快速退火的應用范圍和優勢介紹 2729次閱讀
- 熱傳遞的三種方式是什么 2464次閱讀
- 電源管理入門:Thermal熱管理 5116次閱讀
- FDA,CE將要執行EMC新版標準:IEC 60601-1-2: 2014+A1:2020 ED4.1 8619次閱讀
- Arm系列-智能功率分配IPA技術 1486次閱讀
- 熱管理系統建模案例:各個回路的搭建 2116次閱讀
- Thermal框架源碼剖析 2673次閱讀
- 寬禁帶器件和仿真環境介紹 1582次閱讀
- 在貼片加工廠中有哪些安全防護需要了解 1408次閱讀
- 復合放大器實現高精度的高輸出驅動能力 獲得最佳的性能 1712次閱讀
- 用降壓型穩壓器或線性穩壓器電源時值來會為負載供電 1058次閱讀
- 鋰電池并聯充電時保護板均衡原理 3.2w次閱讀
- 更小更智能的電機控制器推進HEV/EV市場 1181次閱讀
- 紅外熱釋電傳感器與紅外傳感器差異對比 2.2w次閱讀
- 熱焊盤與反焊盤 1.7w次閱讀
下載排行
本周
- 1PFC電路與BOOST電路設計實例分享
- 1.83 MB | 12次下載 | 4 積分
- 2世平基于靈動微 SPIN560C 的低壓無刷電機應用方案
- 10.93 MB | 11次下載 | 免費
- 3電源測試報告-基于 國民技術 N32L406 和杰華特 JW3376+3330 的 BMS 方案
- 6.47 MB | 11次下載 | 免費
- 4電流檢測芯片FP135應用說明
- 1.24 MB | 3次下載 | 免費
- 5HC88L051F4低功耗芯片規格書
- 4.76 MB | 1次下載 | 免費
- 6CIU32D655x5數據手冊
- 2.14 MB | 1次下載 | 免費
- 7納米晶隔磁片在無線電動牙刷中的應用
- 0.04 MB | 次下載 | 免費
- 8SS1150 SMA肖特基二極管產品規格書
- 0.93 MB | 次下載 | 免費
本月
- 1常用電子元器件使用手冊
- 2.40 MB | 52次下載 | 免費
- 2高功率密度碳化硅MOSFET軟開關三相逆變器損耗分析
- 2.27 MB | 33次下載 | 10 積分
- 3PFC電路與BOOST電路設計實例分享
- 1.83 MB | 12次下載 | 4 積分
- 4世平基于靈動微 SPIN560C 的低壓無刷電機應用方案
- 10.93 MB | 11次下載 | 免費
- 5電源測試報告-基于 國民技術 N32L406 和杰華特 JW3376+3330 的 BMS 方案
- 6.47 MB | 11次下載 | 免費
- 6USB拓展塢PCB圖資料
- 0.57 MB | 11次下載 | 免費
- 7MS1826 HDMI 多功能視頻處理器數據手冊
- 4.51 MB | 9次下載 | 免費
- 8HAL9303線性霍爾效應傳感器技術手冊
- 0.70 MB | 9次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935134次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420064次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233089次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191424次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183352次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81600次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73818次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65991次下載 | 10 積分
電子發燒友App






創作
發文章
發帖
提問
發資料
發視頻
上傳資料賺積分
評論