資料介紹
侵徹武器穿入地面等堅硬物質的加速度可達重力加速度的2 萬倍至幾十萬倍, 要求所用加速度傳感器既能抗擊該工作環境, 又能識別沖擊與鉆入的整個過程。美國侵徹武器用MEMS 大g 值加速度計屬電容傳感器, 其工作原理采用2 個電參數完全相同的電容,1 個作檢測電容,1 個作參考電容, 將被測加速度值的變化轉換成電容量的變化而實現。該加速度計由結構單元和信號處理電路組成。實驗結果表明, 尚需對2 組成部分進一步集成, 對機械靜電阻尼進行優化, 對封裝深入研究。
關 鍵 詞 : 大g 值加速度計; 電容傳感器; 微機電系統(MEMS); 侵徹武器
Abstract: The acceleration of penetrator weapon when it irrupts into ground firm substance is twenty thousand times to hundreds thousand of times of gravity acceleration, the acceleration sensor that was required not only oppugns work circumstance but also identifies the process of concussion and irruption. High-g accelerometer in MEMS for USA penetrator weapon pertains to capacitance sensor, its operational principle is that 2 capacitances with same electric parameter are used, one used as test, and another used as reference, and that the change of acceleration value tested is transformed in the change of capacitance quantity. High-g accelerometer consists of structure unit and the signal processing circuit. The tested results show that 2 parts of structure unit and the signal processing circuit should be integrate d and the mechanical static damp is optimized, the encapsulation is researched.
Key Words: High-G Accelerometer; Capacitance sensor; MEMS; Penetrator Weapon
關 鍵 詞 : 大g 值加速度計; 電容傳感器; 微機電系統(MEMS); 侵徹武器
Abstract: The acceleration of penetrator weapon when it irrupts into ground firm substance is twenty thousand times to hundreds thousand of times of gravity acceleration, the acceleration sensor that was required not only oppugns work circumstance but also identifies the process of concussion and irruption. High-g accelerometer in MEMS for USA penetrator weapon pertains to capacitance sensor, its operational principle is that 2 capacitances with same electric parameter are used, one used as test, and another used as reference, and that the change of acceleration value tested is transformed in the change of capacitance quantity. High-g accelerometer consists of structure unit and the signal processing circuit. The tested results show that 2 parts of structure unit and the signal processing circuit should be integrate d and the mechanical static damp is optimized, the encapsulation is researched.
Key Words: High-G Accelerometer; Capacitance sensor; MEMS; Penetrator Weapon
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- MEMS加速度計基本振動特性
- MEMS加速度計振動校正說明
- MEMS加速度計的振動校正介紹
- 微加速度計的原理與應用
- 用于機器健康監測的低噪聲MEMS加速度計
- 如何快速了解評估MEMS加速度計?將加速度轉換為速度資料下載
- ADXL375: 3軸、±200 g數字MEMS加速度計
- 選擇一個加速度計的技巧 10次下載
- MEMSIC攻克加速度計難題 8次下載
- MEMS加速度計的溫度誤差建模及補償_秦麗 2次下載
- ADXL375_3軸、±200g數字MEMS加速度計 38次下載
- ADI公司MEMS加速度計ADXL345簡介與例程 0次下載
- 基于BCB鍵合的MEMS加速度計圓片級封裝工藝 0次下載
- 三維MEMS加速度計的測試方法
- 三維MEMS加速度計的性能測試方法與分析
- 狀態監測中數字MEMS加速度計的混疊效應 1265次閱讀
- MEMS加速度計中的振動校正 2901次閱讀
- MEMS加速度計性能成熟 1451次閱讀
- 為什么MEMS加速度計正在成為設計人員在CbM應用中的最佳選擇 1633次閱讀
- 如何推導電容式MEMS加速度計中使用的傳遞函數 3078次閱讀
- 如何擴展MEMS加速度計的帶寬 4228次閱讀
- 加速度計的安裝方法分享 5489次閱讀
- MEMS的工藝流程和MEMS加速度計的應用前景詳細說明 4423次閱讀
- 基于微型霍普金森桿技術實現高g值加速度沖擊傳感器測量裝置的設計 3704次閱讀
- digilent三軸MEMS加速度計傳感模塊介紹 2792次閱讀
- digilentPmodACL三軸加速度計介紹 2296次閱讀
- 關于一種帶數模混合輸出的加速度計系統的設計和驗證 4577次閱讀
- MEMS加速度計是什么 加速度計工作原理 2.7w次閱讀
- 如何用加速度計中斷引腳執行喚醒和非運動檢測 4881次閱讀
- 新型MEMS加速度計與商用壓電(PZT)狀態監控加速度計的比較 8141次閱讀
下載排行
本周
- 1DC電源插座圖紙
- 0.67 MB | 2次下載 | 免費
- 2AN158 GD32VW553 Wi-Fi開發指南
- 1.51MB | 2次下載 | 免費
- 3AN148 GD32VW553射頻硬件開發指南
- 2.07MB | 1次下載 | 免費
- 4AN111-LTC3219用戶指南
- 84.32KB | 次下載 | 免費
- 5AN153-用于電源系統管理的Linduino
- 1.38MB | 次下載 | 免費
- 6AN-283: Σ-Δ型ADC和DAC[中文版]
- 677.86KB | 次下載 | 免費
- 7SM2018E 支持可控硅調光線性恒流控制芯片
- 402.24 KB | 次下載 | 免費
- 8AN-1308: 電流檢測放大器共模階躍響應
- 545.42KB | 次下載 | 免費
本月
- 1ADI高性能電源管理解決方案
- 2.43 MB | 450次下載 | 免費
- 2免費開源CC3D飛控資料(電路圖&PCB源文件、BOM、
- 5.67 MB | 138次下載 | 1 積分
- 3基于STM32單片機智能手環心率計步器體溫顯示設計
- 0.10 MB | 130次下載 | 免費
- 4使用單片機實現七人表決器的程序和仿真資料免費下載
- 2.96 MB | 44次下載 | 免費
- 53314A函數發生器維修手冊
- 16.30 MB | 31次下載 | 免費
- 6美的電磁爐維修手冊大全
- 1.56 MB | 24次下載 | 5 積分
- 7如何正確測試電源的紋波
- 0.36 MB | 17次下載 | 免費
- 8感應筆電路圖
- 0.06 MB | 10次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935121次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420062次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233088次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191367次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183335次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81581次下載 | 10 積分
- 7Keil工具M(jìn)DK-Arm免費下載
- 0.02 MB | 73810次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65988次下載 | 10 積分
評論