電子發燒友App
MAX15061 80V、300mW boost轉換器及電流監測器，適用于APD偏置
?
The MAX15061 consists of a constant-frequency pulse-width modulating (PWM) step-up DC-DC converter with an internal switch and a high-side current monitor with high-speed adjustable current limiting. This device can generate output voltages up to 76V and provides current monitoring up to 4mA (up to 300mW). The MAX15061 can be used for a wide variety of applications such as avalanche photodiode biasing, PIN biasing, or varactor biasing, and LCD displays. The MAX15061 operates from 2.7V to 11V.
The constant-frequency (400kHz), current-mode PWM architecture provides low-noise output voltage that is easy to filter. A high-voltage, internal power switch allows this device to boost output voltages up to 76V. Internal soft-start circuitry limits the input current when the boost converter starts. The MAX15061 features a shutdown mode to save power.
The MAX15061 includes a current monitor with more than three decades of dynamic range and monitors current ranging from 500nA to 2mA with high accuracy. Resistor-adjustable current limiting protects the APD from optical power transients. A clamp diode protects the monitor’s output from overvoltage conditions. Other protection features include cycle-by-cycle current limiting of the boost converter switch, undervoltage lockout, and thermal shutdown if the die temperature reaches +160°C.
The MAX15061 is available in a thermally enhanced 4mm x 4mm, 16-pin TQFN package and operates over the -40°C to +125°C automotive temperature range.
The constant-frequency (400kHz), current-mode PWM architecture provides low-noise output voltage that is easy to filter. A high-voltage, internal power switch allows this device to boost output voltages up to 76V. Internal soft-start circuitry limits the input current when the boost converter starts. The MAX15061 features a shutdown mode to save power.
The MAX15061 includes a current monitor with more than three decades of dynamic range and monitors current ranging from 500nA to 2mA with high accuracy. Resistor-adjustable current limiting protects the APD from optical power transients. A clamp diode protects the monitor’s output from overvoltage conditions. Other protection features include cycle-by-cycle current limiting of the boost converter switch, undervoltage lockout, and thermal shutdown if the die temperature reaches +160°C.
The MAX15061 is available in a thermally enhanced 4mm x 4mm, 16-pin TQFN package and operates over the -40°C to +125°C automotive temperature range.
?
關鍵特性
- Input Voltage Range
- +2.7V to +5.5V (Using Internal Charge Pump) or +5.5V to +11V
- Wide Output-Voltage Range from (VIN + 1V) to 76V
- Internal 1Ω (typ) 80V Switch
- 300mW Boost Converter Output Power
- Accurate ±10% (500nA to 1mA) and ±3.5% (1mA to 4mA) High-Side Current Monitor
- Resistor-Adjustable Ultra-Fast APD Current Limit (1μs Response Time)
- Open-Drain Current-Limit Indicator Flag
- 400kHz Fixed Switching Frequency
- Constant PWM Frequency Provides Easy Filtering in Low-Noise Applications
- Internal Soft-Start
- 2μA (max) Shutdown Current
- -40°C to +125°C Temperature Range
- Small Thermally Enhanced, 4mm x 4mm, 16-Pin TQFN Package
應用/使用
| 雪崩光電二極管偏置和監測電路 | |
| FBON模塊 | |
| GPON模塊 | |
| LCD顯示器 | |
| 低噪聲變?nèi)荻O管偏置電源 | |
| PIN二極管偏置電源 |
工商網監
評論